Training modules T01 - Function of safety valves in the plant Basics of overpressure protection with safety devices Overpressure scenarios, terms and definitions according to codes and standards Practical introduction to the parts on the safety valve Function of spring-loaded and pilot-operated safety valves as well as the supplemantery loading system Back pressure Inlet pressure loss Installation and installation position Materials Regulations, codes and standards T02 - LESER Chatroom Demonstration Demonstration with air Safety valve funtion based on the lift-pressure diagram of spring-loaded and pilot-operated safety valves and the supplementary loading system Effects of built-up and superimposed backpressure and introduction of product solutions Effect of exceeding the 3% inlet pressure loss criteria Demonstration with water Safety valve function based on the lift-pressure diagram of spring-loaded safety valves T05 – Maintenance and repair of safety valves Maintenance intervals Function test in the plant Informationen, instructions and guidance on maintenance Maintenance Process Workshops and necessary equipment Troubleshooting and fixing Web services (spare part finder, pressure change, certificates) T06 – Maintenance - Spring loaded safety valves Disassembly and cleaning of the parts Spare parts ordering including spare parts kits Rework disc and seat Selection of the correct spring for pressure change Assembly with torque consideration Adjustment of the cold differential test pressure Various tightness tests according to international standards T06.01 – Maintenance - Pilot operated safety valves Areas of application Detailed functional description of the pilot-operated safety valves Additional equipment Disassembly and cleaning of the parts Rework disc and seat Replacement of soft sealings with the LESER spare part kits Assembly with torque consideration Testing of pilot-operated safety valves T06.02 – Maintenance - Clean Service safety valves Areas of application Hygiene requirements Regulations for cleaning CIP/SIP/COP Additional equipment Function of the pneumatic lifting device Disassembly and cleaning of the parts Replacement of all soft sealings and the PTFE bellow Assembly with torque consideration Testing of Clean Service safety valves T06.03 – Maintenance - Critical Service safety valves Areas of application Temperature and pressure limits PTFE material designs Additional equipment Disassembly and cleaning of the parts Replacement of all soft sealings and the PTFE bellow Assembly with torque consideration Disassembly and assembly of additional options Testing of Critical Service safety valves T09 – The Company The Company - Your entry into the world of LESER LESER Kontor Tour LESER Museum 1818 Chatroom, the demonstration facility Product exhibition Presentation of the test lab Virtual factory tour Hohenwestedt Optional factory tour in Hohenwestedt
Training facts Training duration Training hours Number of attendees € Training fee Hamburg Training location
