Critical Service
Critical Service Safety Valve from LESER

Safety valves with PTFE-lining for corrosive media

  • Medium-touched components made of corrosion resistant PTFE
  • Safety valve for the protection of highly corrosive media
  • Cost-effective alternative to high-alloyed materials
  • ATEX-compliant version in electrically conductive PTFE possible

Industries

Approvals

LESER Critical Service safety valves are designed, marked, produced and approved according to the requirements of the following regulations:

  • LESER CE Approvel
  • LESER ASME Approvel
  • LESER EAC Approvel
  • LESER Chinese TS Approvel

Valve Types

Type 447

PTFE-full lining at the inlet and outlet area for highly corrosive medium

DN 25 - DN 100 (1" - 4")

Type 449

Block body valve with flushing protective gas, all special materials available

DN 25 - DN 100 (1" - 4")

Technical data Critical Service

Nominal Diameter at Inlet
DN 25 - DN 100 | 1" - 4"
Actual Orifice Diameter d₀
23 mm - 92 mm | 0.91 in - 3.62 in
Actual Orifice Area A₀
415 mm² - 6.648 mm² | 0.645 in² - 10.304 in²
Pressure
0.1 bar - 16 bar | 1.45 psig - 232 psig
Temperature (in accordance with DIN EN)
-85 °C to 200 °C | -121 °F to 392 °F
Body Material
1.0460, 1.0619 | SA 105, SA 216 WCB
Valve Connection
Flange in accordance with DIN EN 1092-1 and ASME B 16.5
Bellows Material (optional)
Stainless steel, PTFE, Hastelloy C276
Load Type
Spring-loaded
Valvestar from LESER

VALVESTAR®

Sizing of your safety valve.

VALVESTAR®
Download Area of LESER

Downloads

In our comprehensive download area you will find all necessary documents and detailed information on safety valves you need.

Download area
Contact LESER Teaser

Contact LESER

Send a message to LESER

Contact
	LESER_Contact_worldwide_Teaser

Contact finder

Your local contact person will support you with all questions concerning the safety valve.

Find your local contact