Web Service Option finder
Options for safety valves from LESER

Options for your LESER Safety Valve

Options allow LESER safety valves to be adapted to your individual requirements. This allows them to be configured directly for the respective application. With its large number of options, LESER allows you to create up to two million different valve configurations.

This is what you do

You want to know if LESER offers your desired option? Then enter a keyword (e.g. bellows) and select the relevant Option Code.
You have an option code on your safety valve and want to know which option it is indicating? Enter the 3-digit option code (e.g. J78) and find out what the option is.

Options
Option-Code Description
J55 Bellows: for high set pressure
J63 Bellows: for low set pressure
J79 Bellows: Elastomer EPDM
J87 Bellows: Elastomer NBR
J86 Functional tightness: high tightness, LGS 0201
M90 SLS adaption: Spindel:ThreadConnection
M91 SLS adaption: Bonnet: hole circle
M92 SLS adaption: Adjusting screw, special
I28 Change nominal diameter inlet to DN 40 / NPS 1 1/2
J13 Change nominal diameter inlet to DN 80 / NPS 3
H34 Inlet connection: GS-Aseptik thread form A
H36 Inlet connection: BS-Aseptik-clamp+nut form A
H54 Inlet connection: GT-Aseptic thread Form B
H56 Inlet connection: BT-Aseptic-clamp+nut form B
H58 Inlet connection: BD- NEUMO sterile clamp
H60 Inlet connection: GD-NEUMO sterile clamp
H71 Inlet connection: NF-flange, groove Form A
H73 Inlet connection: BF- flange, tongue form A
H75 Inlet connection: NG-flange, groove Form B
H77 Inlet connection: BG- flange, tongue form B
I71 Inlet connection: FD-Flange PN 16 EN 1092
I73 Inlet connection: DO - Clampconnection / ISO2852
I75 Inlet connection: BO - Clampconnection /ASME BPE
I82 Inlet connection: VG-DN 32 Varivent connection
I83 Inlet connection: VH - DN 50 Varivent connection
I85 Inlet connection: AP - APV-FNH1 groove fl. PN40
L70 Inlet connection: VC-Varivent connection 80
L75 Inlet connection: GO-SC-screwed socket DIN 11851
L76 Inlet connection: KO-SD-Clamp DIN 11851
L77 Inlet connection: 00-Welded connection
L78 Inlet connection: TN-Tuchenhagen-Flange
L79 Inlet connection: SO - Clampconnection /DIN32676
L80 Inlet connection: VE-Varivent connection 127
L90 Inlet connection: AF-APV-FG1 Flange
L92 Inlet connection: AN-APV-FN1 flange
L94 Inlet connection: FA-Flange ANSI CL150 RF
L96 Inlet connection: CO - Clampconnection / ISO2852
H35 Outlet connection: GS-Aseptik-thread Form A
H37 Outlet connection: BS-Aseptik-clamp+nut form A
H55 Outlet connection: GT-Aseptic thread Form B
H57 Outlet connection: BT-Aseptic clamp+nut form B
H59 Outlet connection: BD - NEUMO sterile clamp
H61 Outlet connection: GD- NEUMO sterile thread
H72 Outlet connection: NF- flange, groove Form A
H74 Outlet connection: BF- flange, tongue form A
H76 Outlet connection: NG- flange, groove Form B
H78 Outlet connection: BG- flange, tongue form B
I72 Outlet connection: FD-Flange PN 16 EN 1092
I74 Outlet connection: DO - Clampconnection / ISO2852
I76 Outlet connection: BO - Clampconnection /ASME BPE
L81 Outlet connection: GO-SC-screwed socket DIN 11851
L82 Outlet connection: KO-SD-clamp DIN 11851
L83 Outlet connection: 00-Welded connection
L84 Outlet connection: TN-Tuchenhagen-flange
L85 Outlet connection: AP - APV-FNH1 groove fl. PN40
L86 Outlet connection: SO - Clampconnection /DIN32676
L91 Outlet connection: AF-APV-FG1 flange
L93 Outlet connection: AN-APV-FN1 flange
L95 Outlet connection: FA-Flange ANSI CL150 RF
L97 Outlet connection: CO - Clampconnection / ISO2852
J41 Lifting device / cap: H8 in double piston design
J62 Lifting device / cap: H2, open bonnet
J65 Lifting device / cap: H2 with O-ring-damper
J66 Lifting device / cap: H4 with O-ring-damper
J69 Lifting device / cap: H4 with lock screw(Test Gag)
J70 Lifting device / cap: H2 with lock screw(Test Gag)
J71 Lifting device / cap: H4 - transport locking device
J72 Lifting device / cap: H2 - transport locking device
K01 Lifting device / cap: H1 with bolted cap H2
K05 Lifting device / cap: H1 with bolted capH2 /Test Gag
K06 Lifting device / cap: H6 bolted lifting dev.H4
K27 Lifting device / cap: H6 bolted lifting dev.H4/TestG
M08 Lifting device / cap: Lifting device turned 180°
M69 Lifting device / cap: H2 / H4 with E-CTFE sealing
I03 Inspections: KR - Korean Register
I06 Inspections: NK - Nippon Kaiji Kyokai
M1F Inspections: CCS -Chinese Classifi. Society
N31 Inspections: USCG - U.S. Coast Guard
M24 Specification of TAG-Marking: plate, stainless steel
M25 Specification of TAG-Marking: with tag (foil / paper)
M26 Specification of TAG-Marking: stamped letters,outlet fl. top
M27 Specification of TAG-Marking: stamped letters on inlet body
M29 Specification of TAG-Marking: with stainless steel tag
M31 Specification of TAG-Marking: stamped letters, E-Fl
M39 Specification of TAG-Marking: stamped letters,outlet fl.let.
M42 Specification of TAG-Marking: stamped letters,outlet fl.bot.
Q61 Specification of TAG-Marking: stamped letters,fl SV-s. front
Q62 Specification of TAG-Marking: stamped letters,fl SV-s. back
Q63 Specification of TAG-Marking: stamped letters,fl SV-s. side
Q64 Specification of TAG-Marking: stamped letters,fl pip-s front
Q65 Specification of TAG-Marking: stamped letters,fl pip-s. back
Q66 Specification of TAG-Marking: stamped letters,fl pip-s .side
J31 Bonnet, Yoke: with vent hole 11,5 mm
J32 Bonnet, Yoke: with control connection G 1/4
J34 Bonnet, Yoke: bonnet without vent hole
J35 Bonnet, Yoke: lock screw (1.4401) f. G1/4
J95 Bonnet, Yoke: with control connect. NPT 1/2
K04 Bonnet, Yoke: w. control connection NPT 1/8
M70 Bonnet, Yoke: with bug screen
L06 Painting: without coating
L1C Painting: 2 Coating systems
J18 Drain hole: G 1/4 with lock screw(1.4401)
J19 Drain hole: G 1/2 with lock screw(1.4401)
R48 Drain hole: NPT 1/2 w. lock screw (1.4401)
J45 Adjusting screw: adjusting screw with collar
J46 Adjusting screw: adjg screw+collar+splited ring
J47 Adjusting screw: adjg screw+collar+unsplit.ring
M07 Pressure setting: with steam
M09 Pressure setting: with water
M10 Pressure setting: with correction for fluids
N2C Documentation: Ferrite test body SPECIAL
N2D Documentation: Hydrotest custom body SPECIAL
N2E Documentation: Hydrotest custom bonn SPECIAL
N2F Documentation: Hydrotest custom nozzl SPECIAL
N2G Documentation: IGC ASTM A 262-E body
N2H Documentation: IGC ASTM A 262-E bonnet
N2I Documentation: IGC ASTM A 262-E nozzle
N2J Documentation: IGC ASTM A 262-E disc
N2M Documentation: X-ray body compl. DIN_EN
N2N Documentation: X-ray bonnet compl. DIN_EN
N2O Documentation: X-ray body crit. ar. DIN_EN
N2P Documentation: X-ray bonnet crit. ar. DIN_EN
N4X Documentation: Ferrite-Testing Content≤0,5%
N4Y Documentation: Photo documentation light
N4Z Documentation: Photo documentation advanced
N5X Documentation: Ferrite-Check bar≤3%, cast≤13%
Y40 Documentation: tightness- 3.1, Leckr.1
Y51 Documentation: Inspection certificate 3.1
Y60 Documentation: Inspection certificate 3.2 TÜV
L54 Gasket material: KLINGERsil C-4400
L68 Gasket material: PTFE Compound
H63 Flange facing outlet: RTJ - Ring Joint Facing, B16.5
H88 Flange facing outlet: Form B1: "rough" DIN EN 1092
H90 Flange facing outlet: overwounded Rz=6,3µm
H91 Flange facing outlet: Form D: groove, DIN EN 1092
H92 Flange facing outlet: Form C: tongue, DIN EN1092
H98 Flange facing outlet: Form E: male, DIN EN1092
H99 Flange facing outlet: Form F: female, DIN EN1092
I89 Flange facing outlet: Form N: groove DIN2512 (08/99)
I94 Flange facing outlet: Form E: male,DIN EN1092
I95 Flange facing outlet: Form F: female,DIN EN1092
I96 Flange facing outlet: Form H: O-ring-groove
I97 Flange facing outlet: Form G: O-ring-male
I98 Flange facing outlet: Form C: tongue,DIN EN1092
I99 Flange facing outlet: Form D: groove,DIN EN1092
J02 Flange facing outlet: Form G: O- ring-male
J04 Flange facing outlet: Form H: O- ring-groove
J06 Flange facing outlet: Form V48A: Linde-V-groove
J08 Flange facing outlet: Form V48: Linde-V-groove
J12 Flange facing outlet: Form L: lenticular seal
L37 Flange facing outlet: Raised face Form D, DIN 2526
L38 Flange facing outlet: Form B2: "smooth finish"
L39 Flange facing outlet: Serr spiral finish, Ra=3,2-6,3
L53 Flange facing outlet: Smooth finish, Rz 25 µm
I1A Flanged inlet connection: DN15 PN40, DIN EN 1092 100mm
I1B Flanged inlet connection: DN25 PN40, DIN EN 1092 100mm
I1C Flanged inlet connection: DN15 PN40, DIN EN 1092 90mm
I1D Flanged inlet connection: DN20 PN40, DIN EN 1092 90mm
I1E Flanged inlet connection: DN25 PN40, DIN EN 1092 90mm
I1F Flanged inlet connection: DN15 PN40, DIN EN 1092 95mm
I1G Flanged inlet connection: DN20 PN40, DIN EN 1092 95mm
I21 Flanged inlet connection: DN 15 PN 40, DIN EN 1092
I22 Flanged inlet connection: DN 15 PN 160, DIN EN 1092
I23 Flanged inlet connection: DN 15 PN 250, DIN EN 1092
I24 Flanged inlet connection: DN 15 PN 320, DIN EN 1092
I25 Flanged inlet connection: DN 15 PN 400, DIN EN 1092
I26 Flanged inlet connection: DN 20 PN 40, DIN EN 1092
I27 Flanged inlet connection: DN 20 PN 100, DIN EN 1092
I31 Flanged inlet connection: DN 25 PN 40, DIN EN 1092
I32 Flanged inlet connection: DN 25 PN 160, DIN EN 1092
I33 Flanged inlet connection: DN 25 PN 250, DIN EN 1092
I34 Flanged inlet connection: DN 25 PN 320, DIN EN 1092
I35 Flanged inlet connection: DN 25 PN 400, DIN EN 1092
V01 Flanged inlet connection: NPS 1/2 Cl 150, B16.5
V02 Flanged inlet connection: NPS 1/2 Cl 300/600, B16.5
V03 Flanged inlet connection: NPS 1/2 Cl 900/1500, B16.5
V04 Flanged inlet connection: NPS 1/2 Cl 2500, B16.5
V05 Flanged inlet connection: NPS 3/4 Cl 150, B16.5
V06 Flanged inlet connection: NPS 3/4 Cl 300/600, B16.5
V07 Flanged inlet connection: NPS 3/4 Cl 900/1500, B16.5
V08 Flanged inlet connection: NPS 3/4 Cl 2500, B16.5
V09 Flanged inlet connection: NPS 1 Cl 150, B16.5
V10 Flanged inlet connection: NPS 1 Cl 300/600, B16.5
V11 Flanged inlet connection: NPS 1 Cl 900/1500, B16.5
V12 Flanged inlet connection: NPS 1 Cl 2500, B16.5
V28 Flanged inlet connection: NPS 1 CL600, B16.5
I1H Flanged outlet connection: DN25 PN40, DIN EN 1092 100mm
I1J Flanged outlet connection: DN20 PN40, DIN EN 1092 80mm
I1K Flanged outlet connection: DN25 PN40, DIN EN 1092 80mm
I1L Flanged outlet connection: DN25 PN40, DIN EN 1092 95mm
I1M Flanged outlet connection: DN32 PN40, DIN EN 1092 100mm
I40 Flanged outlet connection: DN 15 PN 40, DIN EN 1092
I41 Flanged outlet connection: DN 15 PN 160, DIN EN 1092
I42 Flanged outlet connection: DN 15 PN 250, DIN EN 1092
I43 Flanged outlet connection: DN 20 PN 40, DIN EN 1092
I44 Flanged outlet connection: DN 20 PN 100, DIN EN 1092
I46 Flanged outlet connection: DN 25 PN 40, DIN EN 1092
I47 Flanged outlet connection: DN 25 PN 160, DIN EN 1092
I48 Flanged outlet connection: DN 25 PN 250, DIN EN 1092
I49 Flanged outlet connection: DN 40 PN 40, DIN EN 1092
I50 Flanged outlet connection: DN 40 PN 160, DIN EN 1092
I51 Flanged outlet connection: DN 40 PN 250, DIN EN 1092
V13 Flanged outlet connection: NPS 1/2 Cl300/600, B16.5
V14 Flanged outlet connection: NPS 1/2 Cl900, B16.5
V15 Flanged outlet connection: NPS 3/4 Cl150, B16.5
V16 Flanged outlet connection: NPS 3/4 Cl300/600, B16.5
V17 Flanged outlet connection: NPS 3/4 Cl900, B16.5
V18 Flanged outlet connection: NPS 1 Cl150, B16.5
V19 Flanged outlet connection: NPS 1 Cl 300/600, B16.5
V20 Flanged outlet connection: NPS 1 Cl 900, B16.5
V21 Flanged outlet connection: NPS 1 1/2 Cl 150, B16.5
V22 Flanged outlet connection: NPS 1 1/2 Cl 300/600, B16.5
V23 Flanged outlet connection: NPS 1 1/2 Cl 900, B16.5
V24 Flanged outlet connection: NPS 1/2 Cl150, B16.5
V90 Flanged outlet connection: NPS 1 CL150, B16.5 G
V91 Flanged outlet connection: NPS 1 CL300/600, B16.5 G
V92 Flanged outlet connection: NPS 1 1/2 CL150, B16.5 G
V93 Flanged outlet connection: NPS 1 1/2 CL300/600, B16.5 G
V99 Flanged outlet connection: NPS 1 CL600, B16.5
X01 Spring material: warmsolid
X04 Spring material: 1.4310 (Stainless Steel)
X08 Spring material: 2.4669 (Inconel X750)
M89 Remote lifting: EEX mII T5 Solenoid valve 24 V
M96 Remote lifting: Solenoid valve 230 V
M97 Remote lifting: Solenoid valve 24 V
M98 Remote lifting: EEX mII T5 - Magnetventil 230V
J33 Bonnet material: 1.0619 (GP240GH)
J36 Bonnet material: 0.7043/60-40-18
J37 Bonnet material: LCB/LCC
J42 Bonnet material: 1.4408/1.4571/1.4404
J54 Bonnet material: 1.4408/CF8M
J99 Bonnet material: 1.0619/WCB/WCC
JA1 Bonnet material: 1.0305/SA-106 + 1.0460/SA-105
JA2 Bonnet material: 1.0619/SA-352 LCB/LCC
JA3 Bonnet material: 1.4571/316Ti
JA4 Bonnet material: 1.7357/WC6
JA7 Bonnet material: 0.7040/60-40-18
K3R Bonnet material: Duplex (CD3MN) SPECIAL
K3S Bonnet material: SuperDuplex (CD3MWCuN) SPECIAL
H62 Flange facing inlet: RTJ - Ring Joint Facing, B16.5
H84 Flange facing inlet: Form B1: "rough" DIN EN 1092
H89 Flange facing inlet: Serr spiral finish, Ra=3,2-6,3
H93 Flange facing inlet: Form D: groove, DIN EN 1092
H94 Flange facing inlet: Form C: tongue, DIN EN1092
H95 Flange facing inlet: overwounded Rz=6,3µm
H96 Flange facing inlet: Form E: male, DIN EN1092
H97 Flange facing inlet: Form F: female, DIN EN1092
I88 Flange facing inlet: Form N: groove DIN2512 (08/99)
J01 Flange facing inlet: Form G: O-ring-male
J03 Flange facing inlet: Form H: O-ring-groove
J05 Flange facing inlet: Form V48A: Linde-V-groove
J07 Flange facing inlet: Form V48: Linde-V-groove
J11 Flange facing inlet: Form L: lenticular seal
L35 Flange facing inlet: Raised face Form D, DIN 2526
L36 Flange facing inlet: Form B2: "smooth finish"
L52 Flange facing inlet: Smooth finish, Rz 25 µm
L55 Flange facing inlet: groove Form D, EN 1092
L58 Flange facing inlet: RTJ Nozzle B16.5 standard
H15 Pressure rating outlet: PN 40 DIN EN 1092
H16 Pressure rating outlet: PN 63 DIN EN 1092
H39 Pressure rating outlet: undrilled
H50 Pressure rating outlet: PN 10 DIN EN 1092
H51 Pressure rating outlet: PN 16 DIN EN 1092
H52 Pressure rating outlet: PN 25 DIN EN 1092
H79 Pressure rating outlet: CL 150 ASME B16.5
H80 Pressure rating outlet: CL 300 ASME B16.5
H82 Pressure rating outlet: CL 600 ASME B16.5
H83 Pressure rating outlet: CL 900 ASME B16.5
R49 Pressure rating outlet: 10K JIS
Y09 Flange facing piping side Form B2, "smooth" DIN EN 1092
Y10 Flange facing piping side Form C, "tongue" DIN EN 1092
Y11 Flange facing piping side Form D, "groove" DIN EN 1092
Y12 Flange facing piping side Form E, "male" DIN EN 1092
Y15 Flange facing piping side Form F, "female" DIN EN 1092
Y18 Flange facing piping side Form G,O-ring female DINEN1092
Y19 Flange facing piping side Form H,O-ring groove DINEN1092
Y61 Flange facing piping side Form A, "flat" DIN EN 1092
Y63 Flange facing piping side Form B1, "rough" DIN EN 1092
Y65 Flange facing piping side Form "STF", ASME B16.5
Y66 Flange facing piping side Form "SGF", ASME B16.5
Y67 Flange facing piping side Form "LTF", ASME B16.5
Y68 Flange facing piping side Form "LGF", ASME B16.5
Y69 Flange facing piping side Form "SMF", ASME B16.5
Y70 Flange facing piping side Form "SFF", ASME B16.5
Y71 Flange facing piping side Form "LMF", ASME B16.5
Y72 Flange facing piping side Form "LFF", ASME B16.5
Y81 Flange facing piping side Form "FF", ASME B16.5
Y83 Flange facing piping side Form "RF", ASME B16.5
Y85 Flange facing piping side Form "RTJ", ASME B16.5
H10 Pressure rating inlet: PN 63 DIN EN 1092
H11 Pressure rating inlet: PN 160 DIN EN 1092
H12 Pressure rating inlet: PN 250 DIN EN 1092
H13 Pressure rating inlet: PN 320 DIN EN 1092
H14 Pressure rating inlet: PN 400 DIN EN 1092
H17 Pressure rating inlet: PN 100 DIN EN 1092
H38 Pressure rating inlet: undrilled
H44 Pressure rating inlet: PN 10 DIN EN 1092
H45 Pressure rating inlet: PN 16 DIN EN 1092
H46 Pressure rating inlet: PN 25 DIN EN 1092
H47 Pressure rating inlet: PN 40 DIN EN 1092
H64 Pressure rating inlet: CL 150 ASME B16.5
H65 Pressure rating inlet: CL 300 ASME B16.5
H67 Pressure rating inlet: CL 600 ASME B16.5
H68 Pressure rating inlet: CL 900 ASME B16.5
H69 Pressure rating inlet: CL 1500 ASME B16.5
H70 Pressure rating inlet: CL 2500 ASME B16.5
J50 Lift stopper: with actuate screw LDeS3001.61
J51 Lift stopper: with ring
J52 Lift stopper: with actuate screwLDeS3001.61
H29 Heating jacket: Connection sleeve G3/8 DIN2986
H30 Heating jacket: Connection sleeve G3/4 DIN2986
H31 Heating jacket: Connection flange DN 15, PN 40
H32 Heating jacket: Connection flange DN 25, PN 40
H33 Heating jacket: for Bonnet spacer
K31 Heating jacket: Connection flange NPS 1/2 ANSI
K32 Heating jacket: Connection flange NPS 1" ANSI
A00 Threaded inlet connection: special thread - inlet
V25 Threaded inlet connection: cutting ring screw fitting
V30 Threaded inlet connection: male thread R / BSPT 1/2"
V31 Threaded inlet connection: male thread R / BSPT 3/4"
V32 Threaded inlet connection: male thread R / BSPT 1"
V33 Threaded inlet connection: male thread R / BSPT 1 1/2"
V38 Threaded inlet connection: female thread Rc / BSPT 1/2"
V39 Threaded inlet connection: female thread Rc / BSPT 3/4"
V40 Threaded inlet connection: female thread Rc / BSPT 1"
V41 Threaded inlet connection: female thread Rc / BSPT 1 1/2"
V44 Threaded inlet connection: SWAGELOK - screw fitting
V46 Threaded inlet connection: cuttingring screwfitting heavy
V47 Threaded inlet connection: cuttingring screwfitting light
V49 Threaded inlet connection: male thread G 3/8", ISO228-1
V50 Threaded inlet connection: female thread G 1/2", ISO228-1
V51 Threaded inlet connection: female thread G 3/4", ISO228-1
V52 Threaded inlet connection: female thread G 1", ISO228-1
V53 Threaded inlet connection: female thread G 1 1/2"ISO228-1
V54 Threaded inlet connection: male thread G 1/2", ISO228-1
V55 Threaded inlet connection: male thread G 3/4", ISO228-1
V56 Threaded inlet connection: male thread G 1", ISO228-1
V57 Threaded inlet connection: male thread G 11/2",ISO228-1
V58 Threaded inlet connection: female thread NPT 1/2, B1.20.1
V59 Threaded inlet connection: female thread NPT 3/4,B1.20.1
V60 Threaded inlet connection: female thread NPT 1,B1.20.1
V61 Threaded inlet connection: male thread NPT 1/2,B1.20.1
V62 Threaded inlet connection: male thread NPT 3/4,B1.20.1
V63 Threaded inlet connection: male thread NPT 1 ,B1.20.1
V64 Threaded inlet connection: male thread NPT 11/2, B1.20.1
V75 Threaded inlet connection: female thread NPT 1 1/2B1.20.1
V83 Threaded inlet connection: male thread G 11/4",ISO228-1
V84 Threaded inlet connection: female thread G 1 1/4"ISO228-1
V85 Threaded inlet connection: male thread NPT 11/4, B1.20.1
V86 Threaded inlet connection: male thread NPT 2, B1.20.1
V87 Threaded inlet connection: female thread NPT 11/4,B1.20.1
V94 Threaded inlet connection: female thread NPT3/4" a=3 3/4"
V96 Threaded inlet connection: female thread NPT 1" a=3 3/4"
V26 Threaded outlet connection: cutting ring screw fitting
V34 Threaded outlet connection: female thread Rc / BSPT 1/2"
V35 Threaded outlet connection: female thread Rc / BSPT 3/4"
V36 Threaded outlet connection: female thread Rc / BSPT 1"
V37 Threaded outlet connection: female thread Rc / BSPT 1 1/2"
V42 Threaded outlet connection: male thread R / BSPT 1"
V43 Threaded outlet connection: male thread R / BSPT 1 1/2"
V65 Threaded outlet connection: female thread G 1/2", ISO228-1
V66 Threaded outlet connection: female thread G 1", ISO228-1
V67 Threaded outlet connection: female thread G1 1/2",ISO228-1
V68 Threaded outlet connection: male thread G 1", ISO228-1
V69 Threaded outlet connection: male thread G 11/2",ISO228-1
V70 Threaded outlet connection: female thread NPT 1/2, B1.20.1
V71 Threaded outlet connection: female thread NPT 1,B1.20.1
V72 Threaded outlet connection: female thread NPT1 1/2,B1.20.1
V73 Threaded outlet connection: male thread NPT 1, B1.20.1
V74 Threaded outlet connection: male thread NPT11/2 ,B1.20.1
V76 Threaded outlet connection: female thread G 3/4",ISO228-1
V77 Threaded outlet connection: female thread NPT 3/4,B1.20.1
V79 Threaded outlet connection: male thread G 11/4",ISO228-1
V80 Threaded outlet connection: female thread NPT 11/4,B1.20.1
V81 Threaded outlet connection: female thread G1 1/4",ISO228-1
V82 Threaded outlet connection: male thread NPT 11/4, B1.20.1
V88 Threaded outlet connection: female thread NPT 2, B1.20.1
V95 Threaded outlet connection: female thread NPT 1" b=2 1/4"
V97 Threaded outlet connection: fem. thread NPT1 1/2" b=2 1/4"
H02 Body material: 1.4404/316L
H04 Body material: 1.4435/316L
H07 Body material: 1.0619/SA-352 LCB/LCC
H1A Body material: CF3M ( special S01)
H1B Body material: MONEL 400 (M-35-1) SPECIAL
H1C Body material: Hast. C-22 (CX2MW) SPECIAL
H1D Body material: Duplex (CD3MN) SPECIAL
H1E Body material: Inconel 625 (CW-6MC) SPECIAL
H1F Body material: SuperDuplex (CD3MWCuN) SPECIAL
H1G Body material: CG8M SPECIAL
H1H Body material: CF8C SPECIAL
H1J Body material: C5 SPECIAL
H20 Body material: 0.6025 (GG 25)
H22 Body material: 1.0619/WCB/WCC
H23 Body material: 0.7043 (GGG 40.3)
H24 Body material: 1.7357/WC6
H25 Body material: 1.4571/316Ti
H26 Body material: 1.0460/1.0425 (C22.8/P 265 GH)
H28 Body material: 1.4408/CF8M
H3A Body material: inl.1.4571 outl.1.0460/1.0425
H81 Body material: 1.4581/CF10M
K1A Nozzle material Duplex SS, S31803, 1.4462
K1D Nozzle material 1.4571/316Ti stellitede
K1E Nozzle material 1.4408/CF8M
K1F Nozzle material 1.4408/CF8M stellited
K1R Nozzle material CG8M SPECIAL
K1S Nozzle material CF8C SPECIAL
K1T Nozzle material 317L SPECIAL
K1U Nozzle material 347 SPECIAL
L62 Nozzle material stellitede sealing surface
L63 Nozzle material 1.4404/316L Dim.PN40 DINEN1092
L64 Nozzle material 1.4404/316L
L65 Nozzle material 1.4404/316L stellitede
L66 Nozzle material Monel 400, N04400, 2.4360
L67 Nozzle material Hasteloy C-4, N06455, 2.4610
L69 Nozzle material Inconel 625, N06625, 2.4856
L20 Seat: stellited sealing surface
L61 Seat: stellitede sealing surface
J89 Stud & nut material: S:A4-70/B8M N:1.4401/A4-70/8M
L02 Surface treatment: pickled version lifting dev.H4
L08 Surface treatment: pickled version
Q77 Surface treatment: pickled version COV
J38 Proximity switch: FH with adapter M12 x 1
J39 Proximity switch: H4 with adapter M12x1/ M18x1
J40 Proximity switch: H8 with adapter M12x1
J93 Proximity switch: N M12x1/ M18x1 (DC)
Q76 Proximity switch: with adapters M12 x 1
N68 Design specification: ASME XIII, VIII (UV-Stamp)
N70 Design specification: ASME XIII, VIII + AD2000
N7C Design specification: acc. to PED (CE-stamp)
N7H Design specification: Impact test at -196 °C
N80 Design specification: Solarvalve / collectorfield
N84 Design specification: Flanged connection welded
N85 Design specification: ASME XIII, VIII (UD-stamp)
R7J Design specification: acc. PESR (UKCA-mark)
Z78 Design specification: COV acc. to NACE MR0175
Y35 Coupling KR with manual-/chain wheel
Y36 Coupling KR+manual-/chain wheel+chain
M93 Control system: limit switch
M63 Packing: packing into foil
I39 Soft seal disc: with sealing plate (PTFE+carb)
J20 Soft seal disc: with soft seal FFKM "C"
J21 Soft seal disc: with soft seal CR "K"
J22 Soft seal disc: with soft seal EPDM "D"
J23 Soft seal disc: with soft seal FKM "L"
J30 Soft seal disc: with soft seal NBR "N"
J44 Soft seal disc: with sealing plate (PTFE-FDA)
J48 Soft seal disc: with sealing plate (PCTFE)
J49 Soft seal disc: with sealing plate VESPEL-SP1
K03 Soft seal disc: with soft seal EPDM "D"90 IRHD
R67 Soft seal disc: with sealing plate PEEK
J24 Metal disc / mat.: 1.4122,turnable
J25 Metal disc / mat.: 1.4404/316L,turnable,stel.
K2A Metal disc / mat.: Super DUPLEX, S32760, 1.4501
L09 Metal disc / mat.: 317L SPECIAL
L19 Metal disc / mat.: 347 SPECIAL
L40 Metal disc / mat.: Monel 400, N04400, 2.4360
L41 Metal disc / mat.: Hastelloy C-4, N06455, 2.4610
L42 Metal disc / mat.: Inconel 625, N06625, 2.4856
L43 Metal disc / mat.: Duplex SS, S31803, 1.4462
L44 Metal disc / mat.: 1.4404/316L
L49 Metal disc / mat.: 1.4122
H42 Brackets: drilled
A66 Special assembled version: SKD Kit
A77 Special assembled version: LA Supply
H19 Valve treatment: Body in- & outside blasted
H21 Valve treatment: Valve outside blasted
J85 Valve treatment: free of oil and grease stand.
Y41 Material certification for: Body/flange bends: EN10204-3.1
Y50 Pressure gauge: Without pressure gauge
Y57 Pressure gauge: Std. press. gauge d=63, G 1/4"
Y58 Pressure gauge: Contact press.gauge d=100,G1/2
Y59 Pressure gauge: Maximum pointer d=100, G 1/2"
L18 inlet body- & disc-material: 1.4404 (316L) for t < -10°C
H66 Pipe standard inlet: ASME BPE & DIN 11866 row C
H85 Pipe standard inlet: DIN 11850 & DIN 11866 row A
H86 Pipe standard inlet: ISO 1127 & DIN 11866 row B
H87 Pipe standard inlet: ISO 2037 / ASME BPE
A84 Pipe standard outlet: ASME BPE & DIN 11866 row C
A85 Pipe standard outlet: DIN 11850 & DIN 11866 row A
A86 Pipe standard outlet: ISO 1127 & DIN 11866 row B
A87 Pipe standard outlet: ISO 2037 / ASME BPE
M64 Seal: doubled and twisted
Y21 Flange facing SV side: Form B2, "smooth" DIN EN 1092
Y22 Flange facing SV side: Form C, "tongue" DIN EN 1092
Y25 Flange facing SV side: Form D, "groove" DIN EN 1092
Y28 Flange facing SV side: Form E, "male" DIN EN 1092
Y29 Flange facing SV side: Form F, "female" DIN EN 1092
Y30 Flange facing SV side: Form G, O-ring female EN 1092
Y37 Flange facing SV side: Form H, O-ring groove EN 1092
Y62 Flange facing SV side: Form A, "flat" DIN EN 1092
Y64 Flange facing SV side: Form B1, "rough" DIN EN 1092
Y73 Flange facing SV side: Form "STF", ASME B16.5
Y74 Flange facing SV side: Form "SGF", ASME B16.5
Y75 Flange facing SV side: Form "LTF", ASME B16.5
Y76 Flange facing SV side: Form "LGF", ASME B16.5
Y77 Flange facing SV side: Form "SMF", ASME B16.5
Y78 Flange facing SV side: Form "SFF", ASME B16.5
Y79 Flange facing SV side: Form "LMF", ASME B16.5
Y80 Flange facing SV side: Form "LFF", ASME B16.5
Y82 Flange facing SV side: Form "FF", ASME B16.5
Y84 Flange facing SV side: Form "RF", ASME B16.5
Y86 Flange facing SV side: Form "RTJ", ASME B16.5
Y87 Flange surface side 1: "SF" ASME B16.5
Y89 Flange surface side 1: "NSF" ASME B16.5
Y91 Flange surface side 1: "StF" ASME B16.5
Y38 Options: Flushing hole G 1/2"
Y39 Options: By-pass with non-return valves
Y49 Options: Drain hole G 1/2"
Y98 Options: Proximity switch
Y99 Options: Drain hole G 1/4"
Z38 Options: Flushing hole NPT 1/2
Z49 Options: Drain hole NPT 1/2
Z50 Options: Blocking of hand wheel
Z51 Options: Blocking of hand wheel (comb)
Z99 Options: Drain hole NPT 1/4
J17 Add. Specification of Marking: Plate: Spirax Sarco
J75 Add. Specification of Marking: with name plate of customer
M30 Add. Specification of Marking: Plate fixed with nails
N8D Add. Specification of Marking: LESER DIGITAL ID QR
M17 Specification of 4th Marking: Marking Worldnameplate 2.l.
M34 Specification of 4th Marking: stamped letters10mm HUELS i-fl
M16 Specification of 3rd Marking: Marking Worldnameplate 1.line
M32 Specification of 3rd Marking: stamped letters 10 mm HÜLS
N69 Specification of 2nd Marking: SS plate,outlet fl.spot welded
Y01 Flange rating piping side PN 25, DIN EN 1092
Y02 Flange rating piping side PN 40, DIN EN 1092
Y03 Flange rating piping side PN 63, DIN EN 1092
Y04 Flange rating piping side PN 100, DIN EN 1092
Y13 Flange rating piping side PN 16, DIN EN 1092
Y14 Flange rating piping side CL 150 ASME B16.5
Y16 Flange rating piping side CL 300 ASME B16.5
Y17 Flange rating piping side PN 160, DIN EN 1092
Y42 Flange rating piping side CL 600 ASME B16.5
Y43 Flange rating piping side CL 900 ASME B16.5
Y96 Flange rating piping side PN 10, DIN EN 1092
Y88 Flange surface side 2: "SF" ASME B16.5
Y90 Flange surface side 2: "NSF" ASME B16.5
Y92 Flange surface side 2: "StF" ASME B16.5
Y05 Flange rating SV-side: PN 25, DIN EN 1092
Y06 Flange rating SV-side: PN 40, DIN EN 1092
Y07 Flange rating SV-side: PN 63, DIN EN 1092
Y08 Flange rating SV-side: PN 100, DIN EN 1092
Y23 Flange rating SV-side: PN 16, DIN EN 1092
Y24 Flange rating SV-side: CL 150 ASME B16.5
Y26 Flange rating SV-side: CL 300 ASME B16.5
Y27 Flange rating SV-side: PN 160, DIN EN 1092
Y44 Flange rating SV-side: CL 600 ASME B16.5
Y45 Flange rating SV-side: CL 900 ASME B16.5
Y97 Flange rating SV-side: PN 10, DIN EN 1092
Y93 Space monitoring device: for std. pressure gauge G 1/4
Y94 Space monitoring device: for max. pointer/cont.pr.gauge
Y95 Space monitoring device: for DN>150,long vers. G 1/2
Y47 Chain/ chain material: steel galvanized plain coil
Y48 Chain/ chain material: stainless steel plain coil
S80 Inlet size PN Schedule 80
I13 Nominal diameter inlet: 48X DN 50
I14 Nominal diameter inlet: 48X DN 15
I16 Nominal diameter inlet: 48X DN 25
I17 Nominal diameter inlet: 48X DN 40
I18 Nominal diameter inlet: 48X DN 65
I19 Nominal diameter inlet: 48X DN 80
I37 Nominal diameter inlet: 48X DN 100
I78 Nominal diameter inlet: 48X NPS 3/4
I79 Nominal diameter inlet: 48X NPS 1
I80 Nominal diameter inlet: 48X NPS 1 1/2
I81 Nominal diameter inlet: 48X NPS 2
I84 Nominal diameter inlet: 48X NPS 2 1/2
I90 Nominal diameter inlet: 48X NPS 3
I92 Nominal diameter inlet: 48X NPS 4
A16 Nominal diameter outlet:48X DN 25
A17 Nominal diameter outlet:48X DN 40
A18 Nominal diameter outlet:48X DN 50
A19 Nominal diameter outlet:48X DN 65
A20 Nominal diameter outlet:48X DN 80
A21 Nominal diameter outlet:48X DN 100
A22 Nominal diameter outlet:48X DN 125
A23 Nominal diameter outlet:48X DN 150
A24 Nominal diameter outlet:48X NPS 2 1/2
A25 Nominal diameter outlet:48X NPS 3
A27 Nominal diameter outlet:48X NPS 4
A28 Nominal diameter outlet:48X NPS 4 1/2
A29 Nominal diameter outlet:48X NPS 5
A30 Nominal diameter outlet:48X NPS 6
A31 Nominal diameter outlet:48X 6" IPS
A79 Nominal diameter outlet:48X NPS 1
A80 Nominal diameter outlet:48X NPS 1 1/2
A81 Nominal diameter outlet:48X NPS 2
I29 Change nominal diameter outlet to DN 80 / NPS 3
I30 Change nominal diameter outlet to DN 150 / NPS 6
M95 Protection case IP65 Protection case (box in box)
M87 heating for control unit standard heating with thermost
M94 heating for control unit Eex heating zone 1
R3A O-Ring, inner top plate seal FKM "ED" conform design
R3B O-Ring, inner top plate seal FFKM "ED" conform design
R3L O-Ring, inner top plate seal FKM-cold, type medium temp
R30 Pilot Supply Filter: included
R23 Fitting according to: Swagelok
R94 Specification of Pilot TAG-No. with tag (foil / paper)
R95 Specification of Pilot TAG-No. with stainless steel tag
R46 Top plate material: 1.4404/316L
R44 Blowdown adjustment Input: interactiv
R64 choosing function Piston Size 1, 28 - 30 bar-g
R28 Remote Sensing with Remote Sensing (RS)
R20 O-Ring, piston PTFE piston seal,spring energ.
R66 O-Ring, piston PTFE piston seal, reinforced
R04 O-ring, seals pos.61 soft seal FKM "L"
R05 O-ring, seals pos.61 soft seal EPDM "D"
R06 O-ring, seals pos.61 soft seal FFKM "C"
R71 Metal disc / mat.: 1.4571 / 1.4404
R24 Manual Blowdown into body
R27 Manual Blowdown to atmosphere
R22 Pilot lifting lever: manually with Test-Gag
R25 Pilot lifting lever: manually
R33 Pilot lifting lever: Cap with Test Gag
R26 Field Test Connector insitu testing (connect. 1/4")
I63 Guide material: 1.4404/316L
K3A Guide material: Monel 400, N04400, 2.4360
K3B Guide material: Hastelloy C-4, N06455, 2.4610
K3C Guide material: Inconel 625, N06625, 2.4856
K3D Guide material: Duplex SS, S31803, 1.4462
K3E Guide material: Super Duplex, S32760, 1.4501
K3F Guide material: 1.0501
K3G Guide material: 1.0460/SA-105
K3L Guide material: 0.7040/60-40-18
K3T Guide material: 1.4571/316Ti/1.4404/316L
I3B Flange hole pattern Inlet: 4 hole pattern acc.DIN EN 1092
I7B Flange hole pattern Inlet: 8 hole pattern acc.DIN EN 1092
I4B Flange hole pattern Outlet: 4 hole pattern acc.DIN EN 1092
I8B Flange hole pattern Outlet: 8 hole pattern acc.DIN EN 1092
K4A Spindle material: Monel 400, N04400, 2.4360
K4B Spindle material: Hastelloy C-4, N06455, 2.4610
K4C Spindle material: Inconel 625, N06625, 2.4856
K4D Spindle material: Duplex SS, S31803, 1.4462
K4E Spindle material: Super DUPLEX,S32760, 1.4501
K4X Spindle material: 1.4021
K4Z Spindle material: 1.4404/316L
K1M Adjusting ring material: Monel 400, N04400, 2.4360
K1N Adjusting ring material: Hast. C-4, N06455, 2.4610
K1O Adjusting ring material: INC. 625, N06625, 2.4856
K1P Adjusting ring material: DUPLEX SS, S31803, 1.4462
K1Q Adjusting ring material: Super DUPLEX, S32760, 1.4501
K2M Lock screw material: Monel 400, N04400, 2.4360
K2N Lock screw material: Hast. C-4, N06455, 2.4610
K2O Lock screw material: INC. 625, N06625, 2.4856
K2P Lock screw material: DUPLEX SS, S31803, 1.4462
K2Q Lock screw material: Super DUPLEX, S32760, 1.4501
K4M Blind plug material: Monel 400, N04400, 2.4360
K4N Blind plug material: Hast. C-4, N06455, 2.4610
K4O Blind plug material: INC. 625, N06625, 2.4856
K4P Blind plug material: DUPLEX SS, S31803, 1.4462
K4Q Blind plug material: Super DUPLEX, S32760, 1.4501
K7R Adjusting screw material: 1.4104
K7S Adjusting screw material: 1.4404/316L
K8R Lifting device / cap material: 1.0460/SA-105
K8S Lifting device / cap material: 1.4408/CF8M
K8T Lifting device / cap material: 1.4404/316L
K8W Lifting device / cap material: 0.7040/60-40-18
Z90 Pressure range High pressure design
I11 Surface treatment type 316_317 free of oil and grease
L8J Stud bolt material Pos. 55 1.7225/SA-193 B7/SA-320 L7
L8K Stud bolt material Pos. 55 1.4401/A4-70/SA-193+320 B8M
Q3H Stud bolt material Pos. 55 SA-453 Gr. 660 B
Q44 Stud bolt material Pos. 55 1.7225/SA-193 B7
Q45 Stud bolt material Pos. 55 A4-70
Q46 Stud bolt material Pos. 55 1.4980/SA-453 Gr. 660 B
Q47 Stud bolt material Pos. 55 A4-70/SA-193 B8M Cl.1 o. 2
Q48 Nuts material Pos. 56 1.7225/SA-194 Gr.7
Q4A Nuts material Pos. 56 A4-70
Q4B Nuts material Pos. 56 1.4980/SA-453 Gr. 660 B
Q4C Nuts material Pos. 56 SA-453 Gr. 660 B
Q4E Nuts material Pos. 56 A4-70/SA-194 8M
Z11 Basic construction of body: Basic constr. body PN40/Cl300
Z12 Basic construction of body: Basic constr. body PN63
Z13 Basic construction of body: Basic constr. body PN100/Cl600
Z14 Basic construction of body: Basic constr. body PN160/Cl900
Z21 Red. at basic constr. of body: Reducer (PN40/Cl300)
Z22 Red. at basic constr. of body: Reducer (PN63)
Z23 Red. at basic constr. of body: Reducer (PN100/Cl600)
Z24 Red. at basic constr. of body: Reducer (PN160/Cl900)
Z61 Materials of seat / disc: 2.4360/2.4375 (Monel 400/K500)
Z62 Materials of seat / disc: 2.4856 (Inconel 625)
Z63 Materials of seat / disc: 2.4819 (Hastelloy C276)
Z64 Materials of seat / disc: 2.4610 (Hastelloy C4)
Z65 Material of spindle: 2.4360 (Monel 400)
Z66 Material of spindle: 2.4856 (Inconel 625)
Z67 Material of spindle: 2.4819 (Hastelloy C276)
Z68 Material of spindle: 2.4610 (Hastelloy C4)
Z69 Material of bellows: 2.4360 (Monel 400)
Z70 Material of bellows: 2.4856 (Inconel 625)
Z71 Material of bellows: 2.4819 (Hastelloy C276)
Z72 Material of bellows: 2.4610 (Hastelloy C4)
Z41 Valve for pressure relief: Globe valve DN15 PN40
Z42 Valve for pressure relief: Globe valve DN15 PN63
Z43 Valve for pressure relief: Globe valve DN15 PN100
Z44 Valve for pressure relief: Globe valve DN15 PN160
Z45 Valve for pressure relief: Globe valve DN15 Cl300
Z46 Valve for pressure relief: Globe valve DN15 Cl600
Z47 Valve for pressure relief: Globe valve DN15 Cl900
Z52 Valve for pressure relief: Needle valve G 1/2 (gland)
Z53 Valve for pressure relief: Needle valve NPT 1/2 (gland)
Z54 Valve for pressure relief: N valve G1/2 bell PN100/CL600
Z55 Valve for pressure relief: N valve G1/2 bell PN160/CL900
Z56 Valve for pressure relief: N valve NPT1/2bell PN100/CL600
Z57 Valve for pressure relief: N valve NPT1/2bell PN160/CL900
R69 Selection nozzle Full nozzle design
R65 Disc surface stellited
Q35 Design/sizing standard acc. to acc.ASME B16.34&PED 2014/68/EU
Q43 Design/sizing standard acc. to acc. PED 2014/68/EU
Q49 Design/sizing standard acc. to ASME B 16.34
Q1K Product certification acc. to EAC Approval
Q42 Product certification acc. to acc. to PED (CE-stamp)
F3T Painting C5M eqvt. coating high temp CS
R4A Needle valve FTC: with needle valve
K10 Balanced piston Balanced piston design
Q01 Position handwheel: Handwheel left
Q02 Position handwheel: Handwheel right
Q27 Mat. Rod pos. 6 1.4408/CF8M
Q09 Base Construction Material COV WCB 3-fold|stainless steel|316
Q10 Base Construction Material COV LCB 5-fold|stainless st.|316
Q11 Base Construction Material COV CF8M|stainless steel|316L
Q12 Mat. Inlet body pos. 1 1.0619/WCB/WCC
Q13 Mat. Inlet body pos. 1 1.0619/WCB/WCC/LCB/LCC
Q14 Mat. Inlet body pos. 1 1.4408/CF8M
Q15 Mat. Body pos. 2 1.0619/WCB/WCC
Q16 Mat. Body pos. 2 1.0619/WCB/WCC/LCB/LCC
Q17 Mat. Body pos. 2 1.4408/CF8M
Q18 Mat. Elbows pos. 3/4 1.0619/WCB/WCC
Q19 Mat. Elbows pos. 3/4 1.0619/WCB/WCC/LCB/LCC
Q20 Mat. Elbows pos. 3/4 1.4408/CF8M
Q22 Mat. seat pos. 5 1.4404/316L
Q21 Mat. Disc pos. 7 1.4404/316L
Q23 Mat. Disc pos. 7 1.4408/CF8M
Q4D Mat. disc lock pos. 8 1.4404/316L
Q4F Mat. disc lock pos. 8 2.4856 / N06625 Gr. 1
Q1N Mat. lock ring/screw pos. 9 A4-70
Q25 Mat. lock ring/screw pos. 9 1.4104
Q26 Mat. lock ring/screw pos. 9 1.4404/316L
Q28 Mat. rod bolt pos. 23 1.4104
Q29 Mat. rod bolt pos. 23 1.4404/316L
Q30 Mat. tappet pos. 61 1.4104
Q31 Mat. tappet pos. 61 1.4404/316L
Q32 Mat. disc srew pos. 13 1.4404/316L
Q33 Mat. lock screw pos. 21 1.4104
Q34 Mat. lock screw pos. 21 1.4404/316L
Q36 Mat. gland pos. 201 1.4404/316L
Q37 Mat. gland packing pos. 204 1.4541/Graphit
Q38 Mat. Spindle pos. 12 1.4021
Q39 Mat. Spindle pos. 12 1.4404/316L
Q3J Mat. Spindle pos. 12 1.4980/Gr.660B
Q40 Mat. yoke pos. 401/404 1.0619/WCB/WCC
Q41 Mat. yoke pos. 401/404 1.4408/CF8M
Q67 Seat surface stellited
Q68 Disc surface stellited
Q69 Valve design Gaskets&packing gland TA-Luft
Q70 Pressure balancing pos.37 with needle valve for 10mm pip
Q71 Pressure discharge pos. 95 Needle valve for 10 mm pipe
Q72 Pressure discharge pos. 95 Flanged globe valve DN15 PN40
Q75 Pressure discharge pos. 95 Needle valve, threaded NPT1/2"
Q7A Pressure discharge pos. 95 Flanged globe valve DN15 PN250
Q7B Pressure discharge pos. 95 Flanged glob.val.1/2"CL300/600
Q7C Pressure discharge pos. 95 Conn. f. pr.relief v. NPT 1/2
Q73 Remote Sensing conn. pos. 35 in the inlet body for POSV
Q3A Flushing/manometer connection Flushing/manometer co.NPT 1/2"
Q3B Flushing/manometer connection Flushing/manometer conn.G 1/2"
Q3C Locking device Blocking of hand wheel
Q2W Drain Drain G1/4 with plug screw
Q2X Drain Drain NPT1/4"with plug screw
Q2Y Drain Drain G1/2 with plug screw
Q2Z Drain Drain NPT1/2"with plug screw
Q05 Flange rating SV-side: PN 250, DIN EN 1092
Q06 Flange rating SV-side: CL 1500 ASME B16.5
Q2A Flange rating SV-side: PN 10, DIN EN 1092
Q2B Flange rating SV-side: PN 16, DIN EN 1092
Q2C Flange rating SV-side: PN 25, DIN EN 1092
Q2D Flange rating SV-side: PN 40, DIN EN 1092
Q2E Flange rating SV-side: PN 63, DIN EN 1092
Q2F Flange rating SV-side: PN 100, DIN EN 1092
Q2G Flange rating SV-side: PN 160, DIN EN 1092
Q2H Flange rating SV-side: CL 150 ASME B16.5
Q2I Flange rating SV-side: CL 300 ASME B16.5
Q2J Flange rating SV-side: CL 600 ASME B16.5
Q2K Flange rating SV-side: CL 900 ASME B16.5
Q5A Nominal size piping-side NPS 1
Q5B Nominal size piping-side NPS 1 1/4
Q5C Nominal size piping-side NPS 1 1/2
Q5D Nominal size piping-side NPS 2
Q5E Nominal size piping-side NPS 2 1/2
Q5F Nominal size piping-side NPS 3
Q5G Nominal size piping-side NPS 4
Q5H Nominal size piping-side NPS 5
Q5I Nominal size piping-side NPS 6
Q5J Nominal size piping-side NPS 8
Q5K Nominal size piping-side NPS 10
Q5L Nominal size piping-side NPS 12
Q5M Nominal size piping-side NPS 14
Q5N Nominal size piping-side NPS 16
Q5O Nominal size piping-side DN 25
Q5P Nominal size piping-side DN 32
Q5Q Nominal size piping-side DN 40
Q5R Nominal size piping-side DN 50
Q5S Nominal size piping-side DN 65
Q5T Nominal size piping-side DN 80
Q5U Nominal size piping-side DN 100
Q5V Nominal size piping-side DN 125
Q5W Nominal size piping-side DN 150
Q5X Nominal size piping-side DN 200
Q5Y Nominal size piping-side DN 250
Q5Z Nominal size piping-side DN 300
Q6A Nominal size piping-side DN 350
Q6B Nominal size piping-side DN 400
Q6N Nominal size piping-side NPS 18
Q6P Nominal size piping-side DN 450
Q07 Flange rating piping side PN 250, DIN EN 1092
Q08 Flange rating piping side CL 1500 ASME B16.5
Q2L Flange rating piping side PN 10, DIN EN 1092
Q2M Flange rating piping side PN 16, DIN EN 1092
Q2N Flange rating piping side PN 25, DIN EN 1092
Q2O Flange rating piping side PN 40, DIN EN 1092
Q2P Flange rating piping side PN 63, DIN EN 1092
Q2Q Flange rating piping side PN 100, DIN EN 1092
Q2R Flange rating piping side PN 160, DIN EN 1092
Q2S Flange rating piping side CL 150 ASME B16.5
Q2T Flange rating piping side CL 300 ASME B16.5
Q2U Flange rating piping side CL 600 ASME B16.5
Q2V Flange rating piping side CL 900 ASME B16.5
Q03 Type of construction: COV combi, Inlet COV
Q04 Type of construction: COV combi, outlet COV
Q3D Type of construction: Change-over valve
Q3I Mat. Disc insert pos. 10 1.4404/316L
N1R QM Cert. Option Code 3.1 Test Report Visual Inspec.
N1S QM Cert. Option Code 2.2 Test Report Dim. Insp.
R40 Installation space reduced
M86 Functional tightness: Helium leakage test vacuum
N62 Functional tightness: Helium leakage test
M33 Inspections: TÜV- certification
M38 Inspections: ABS - American Bureau of Ship.
M43 Inspections: BV - Bureau Veritas
M45 Inspections: DNV - Det Norske Veritas
M47 Inspections: GL - Germanischer Lloyd
M48 Inspections: LR - Lloyds Register
M50 Inspections: RINA-Registro Italiano Navale
M55 Inspections: RS -Russian Maritime Rg. of S.
N1M Inspections: NAMUR NE 167 TÜV certification
F28 Documentation: FET acc. MESC SPE 77/312 Cl. A
F29 Documentation: FET acc. MESC SPE 77/312 Cl. B
H03 Documentation: LESER - 3.1
M18 Documentation: Cert 3.1 Shell tightness
M22 Documentation: Cert 3.1 Seat tight leakage
M23 Documentation: list of material f.inner parts
M28 Documentation: Cert 3.1 Back tight test fluid
M44 Documentation: Cert3.1 magn. part. test body
M53 Documentation: Cert 3.1 Free of oil + grease
M56 Documentation: Cert 3.1 Ultrasonic test inlet
M57 Documentation: Meetbrief acc. to Stoomwezen
M66 Documentation: test report seat tightness
M67 Documentation: Assembly Kit Certificate
M68 Documentation: Cert 3.1 Hydrost.Test LGS 0209
M77 Documentation: Cert3.1Seat tight helium sniff
M78 Documentation: Cert 3.1 Back tight dipping
M81 Documentation: Cert3.1Seat tight helium vacu
M82 Documentation: Cert 3.1 Back tight helium
N03 Documentation: SS-bellows - 3.1 (He- test)
N04 Documentation: Docu. special surfaces
N05 Documentation: Cert 3.1 cdtp test
N17 Documentation: Spirax Sarco UK Coversheet
N1A Documentation: PMI RFA spindle
N1B Documentation: PMI RFA guide
N1C Documentation: PMI RFA bonnet
N1D Documentation: PMI RFA spring
N1E Documentation: PMI RFA bellows
N1F Documentation: PMI RFA cap/lifting device
N1G Documentation: PMI RFA top plate (POSV)
N1H Documentation: PMI RFA piston guide (POSV)
N1J Documentation: PMI RFA spring (POSV Pos.59)
N1U Documentation: PMI RFA lower spring plate
N1W Documentation: spring data sheet
N2A Documentation: X-ray body crit. ar. ASME
N2B Documentation: X-ray bonnet crit. ar. ASME
N2K Documentation: X-ray body compl. ASME
N2L Documentation: X-ray bonnet compl. ASME
N2V Documentation: X-ray outl.body crit. ar. ASME
N52 Documentation: Surface crack test disc
N53 Documentation: Surface crack test seat/nozzle
N54 Documentation: Surface Crack test body
N55 Documentation: PMI RFA disc
N56 Documentation: PMI RFA seat/nozzle pos. 5
N57 Documentation: PMI RFA body
P79 Documentation: anticor.Certif.Frosio3rd party
P80 Documentation: corro.certifi.Frosio III inter
P81 Documentation: adherence test X-Cut
P82 Documentation: adherence test Pulloff
P83 Documentation: Holiday Test
P84 Documentation: dry film thickness (DFT)
R98 Documentation: Cert 3.1 Testing leack Pr.seal
N64 Body tightness: SV He-test 1x10-5 mbar l/s
N65 Body tightness: SV-tightness test outside
N71 Design specification: acc. to UDT (VR Polen)
N73 Design specification: TS Approval (P.R. China)
N74 Design specification: acc. KOSHA, WI_3612.14 (Korea)
N75 Design specification: acc. to Cert. for Canada
N77 Design specification: acc. NACE Standard MR0103-2012
N78 Design specification: acc. NACE Standard MR0175-2021
N79 Design specification: acc. to EMPG
R70 Design specification: acc.NACE Standard MR0175-2021
H01 Material certification for: Body Pos. 1: EN10204-3.1
H09 Material certification for: Body Pos. 1: EN10204-3.2
H2D Material certification for: Adjusting ring P6: EN10204-2.2
H2E Material certification for: Bonnet spacer P11: EN10204-3.1
H2F Material certification for: Springplate P16/17:EN10204-2.2
H2G Material certification for: Pressure screw: EN10204-2.2
H2H Material certification for: Sealing Pos. 60: EN10204-2.2
H2J Material certification for: Adjustingscrew P73:EN10204-2.2
H2K Material certification for: Spring Pos. 59: EN10204-3.1
H2M Material certification for: Adjusting ring P6: EN10204-3.1
L22 Material certification for: Inlet flange: EN10204-3.1
L23 Material certification for: Disc Pos. 7: EN10204-3.1
L30 Material certification for: Bonnet Pos. 9: EN10204-3.1
L31 Material certification for: Cap/Lifting device:EN10204-3.1
L34 Material certification for: Outlet body Item 2:EN10204-3.1
L59 Material certification for: Seat/ Nozzle Pos.5:EN10204-3.1
L60 Material certification for: Spring Pos. 54: EN10204-3.1
N07 Material certification for: Studs Pos. 55: EN10204-3.1
N08 Material certification for: Nuts Pos. 56: EN10204-3.1
N3A Material certification for: Outlet adaptor: EN10204-3.1
N3B Material certification for: Outlet flange: EN10204-3.1
N90 Material certification for: Low. spring plate EN10204-3.1
N94 Material certification for: Spindle Pos. 12: EN10204-3.1
N95 Material certification for: Guide Pos. 8: EN10204-3.1
N96 Material certification for: Bellows Pos. 15: EN10204-3.1
Q1L Material certification for: Seat Pos.5 :EN10204-3.1
Q1M Material certification for: Seat Pos.5 :EN10204-3.2
Q50 Material certification for: Disc Pos. 7: EN10204-3.1
Q51 Material certification for: Studs Pos. 55: EN10204-3.2
Q52 Material certification for: Nuts Item 56: EN10204-3.2
Q53 Material certification for: Body Pos. 2: EN10204-3.1
Q54 Material certification for: Elbows Pos. 3/4: EN10204-3.1
Q55 Material certification for: Inlet body Pos. 1: EN10204-3.1
Q56 Material certification for: Body Pos. 2: EN10204-3.2
Q57 Material certification for: Elbows Pos. 3/4: EN10204-3.2
Q58 Material certification for: Inlet body Pos. 1: EN10204-3.2
Q59 Material certification for: Disc Pos. 7: EN10204-3.2
Q60 Material certification for: Spindle Pos. 12: EN10204-3.2
R75 Material certification for: Piston device: EN10204-3.1
R76 Material certification for: Cover Pos. 9: EN10204-3.1
R77 Material certification for: Piston guide: EN10204-3.1
R78 Material certification for: Body pilot: EN10204-3.1
R79 Material certification for: Bonnet pilot: EN10204-3.1
R84 Material certification for: Manifold Pos. 24: EN10204-3.1
R88 Material certification for: Field test connector: 3.1
R89 Material certification for: Pilot Supply Filter: 3.1
B50 LESER Surface package: Clean Finish 481
B51 LESER Surface package: HyClean Finish 481
B52 LESER Surface package: Sterile Finish 481
B53 LESER Surface package: Clean Finish 483
B54 LESER Surface package: HyClean Finish 483
B55 LESER Surface package: Sterile Finish 483
B56 LESER Surface package: Clean Finish 484
B57 LESER Surface package: HyClean Finish 484
B58 LESER Surface package: Sterile Finish 484
B59 LESER Surface package: Clean Finish 5034 / 484
B60 LESER Surface package: HyClean Finish 5034 / 484
B61 LESER Surface package: Sterile Finish 5034 / 484
B62 LESER Surface package: Clean Finish 485
B63 LESER Surface package: HyClean Finish 485
B64 LESER Surface package: Sterile Finish 485
B65 LESER Surface package: Clean Finish 5034 / 485
B66 LESER Surface package: HyClean Finish 5034 / 485
B67 LESER Surface package: Sterile Finish 5034 / 485
B68 LESER Surface package: Clean Finish 488
B69 LESER Surface package: HyClean Finish 488
B70 LESER Surface package: Sterile Finish 488
N4A Documentation: PMI RFA Outlet body
Q1I Documentation: APZ 3.1 Hydrost. Test LGS 0209
Q1J Differing test duration Hydrostatic test COV compl.
Q78 Documentation SCT: DPT (R-W) Inlet body pos. 1
Q79 Documentation SCT: DPT (R-W) body pos. 2
Q80 Documentation SCT: DPT (R-W) elbows pos. 3/4
Q81 Documentation SCT: DPT (R-W) disc pos. 2.7
Q82 Documentation SCT: DPT (R-W) seat pos. 2.5
Q83 Documentation SCT: FPT Inlet body pos. 1
Q84 Documentation SCT: FPT body pos. 2
Q85 Documentation SCT: FPT elbows pos. 3/4
Q86 Documentation SCT: FPT disc pos. 2.7
Q87 Documentation SCT: FPT seat pos. 2.5
Q89 Documentation SCT: MPT inlet body pos.1
Q90 Documentation SCT: MPT seat pos. 2.5
Q91 Documentation SCT: MPT body pos. 2
Q92 Documentation SCT: MPT elbows pos. 3/4
N1P Documentation PMI: PMI RFA body
N1V Documentation PMI: PMI RFA bonnet
N1Z Documentation PMI: PMI RFA cap/lifting device
N4D Documentation PMI: PMI SPA spindle
N4E Documentation PMI: PMI SPA guide
N4F Documentation PMI: PMI SPA bonnet
N4G Documentation PMI: PMI SPA compression spring
N4H Documentation PMI: PMI SPA bellow
N4I Documentation PMI: PMI SPA cap/lifting device
N4J Documentation PMI: PMI SPA top plate (POSV)
N4K Documentation PMI: PMI SPA piston guide (POSV)
N4L Documentation PMI: PMI SPA dom spring
N4M Documentation PMI: PMI SPA spring plate
N4N Documentation PMI: PMI SPA outlet body
N4O Documentation PMI: PMI SPA outlet adaptor
N4P Documentation PMI: PMI SPA outlet flange
N4Q Documentation PMI: PMI SPA disc
N4R Documentation PMI: PMI SPA seat/nozzle
N4S Documentation PMI: PMI SPA body
N4T Documentation PMI: PMI SPA stud
N4U Documentation PMI: PMI SPA nut
N4V Documentation PMI: PMI SPA inlet flange
Q1A Documentation PMI: PMI SPA body pos. 2
Q1B Documentation PMI: PMI SPA elbows pos. 3/4
Q1C Documentation PMI: PMI SPA inlet body pos. 1
Q1D Documentation PMI: PMI SPA spindle pos. 12
Q88 Documentation PMI: PMI RFA spindle pos. 12
Q93 Documentation PMI: PMI RFA disc pos. 7
Q94 Documentation PMI: PMI RFA seat pos. 5
Q95 Documentation PMI: PMI RFA body pos. 2
Q96 Documentation PMI: PMI RFA elbows pos. 3/4
Q97 Documentation PMI: PMI RFA inlet body pos. 1
Q98 Documentation PMI: PMI SPA disc pos. 7
Q99 Documentation PMI: PMI SPA seat pos. 5
Q1E Documentation X-ray insp.: X-ray test body crit. pos.2
Q1F Documentation X-ray insp.: X-ray test elbows crit pos.3/4
Q1G Documentation X-ray insp.: X-ray test inlet body cr.pos.1
Q1H Documentation X-ray insp.: X-ray test disc compl. pos. 7
J68 Bellows: stainl.steel 1.4571/316Ti o.b.
J78 Bellows: stainless steel 1.4571 / 316Ti
J81 Bellows: Hastelloy C276 / 2.4819
J82 Bellows: Inconel 625 / 2.4856
J83 Bellows: Inconel 625/ conn.Parts 316L
J88 Bellows: high temperature design
L11 Painting: RAL 3002, carmine red
L13 Painting: SPECIAL - valve coating
P1O Painting: anticor, high temp.similar P85
P1P Painting: anticor. C5M similar P86
P1Q Painting: coating Shell LC1-N/M
P1R Painting: coating Shell LC2-N/M, LS2-N/M
P1S Painting: coating Shell LC3-N/M
P1T Painting: coating Shell LS1-N/M
P1V Painting: coating Shell LS3-N/M
P2A Painting: RAL 5005 LESER blue
P2C Painting: RAL 5005 LESER blue, min. 80µm
P2D Painting: RAL 3002, carmine red, min. 80
P2M Painting: anticorrosive C5M for WCB 7004
P85 Painting: anticorrosive high temp. WCB
P86 Painting: anticorrosive C5M for WCB
P87 Painting: anticorrosive high temp. CF8M
P88 Painting: anticorrosive C5M for CF8M
P89 Painting: anticorrosive cryogenic
P90 Painting: 3-layer coating system RAL5005
P91 Painting: 4-layer coating system RAL5005
P92 Painting: 2-layer coating system alu
P93 Painting: 3-layer painting RAL 3002
Contact LESER Teaser

Contact LESER

Send a message to LESER

Contact
	LESER_Contact_worldwide_Teaser

Contact finder

Your local contact person will support you with all questions concerning the safety valve.

Find your local contact

You may also like