Petrochemical

Safety and efficiency of your downstream operation

The demands of the market on the competitiveness of your products are increasing. You can react to this trend through the efficiency and high availability of your plants. You achieve this by almost completely recycling the raw material used.

LESER is your partner to master the resulting challenges. Over the past five years, LESER has professionally handled more than 300 projects worldwide. The fulfilment of demanding valve and process specifications, smooth project handling and comprehensive documentation are the basis for safe and reliable plant operation.

Petrochemical - Products

The LESER Advantage

With its many years of experience, LESER knows and meets the requirements of plant operators, plant designers (EPCs) but also the manufacturers of components and systems in detail.

The product groups API and High Efficiency are designed to meet industry-specific standards such as API 526 or NACE MR0103 / ISO 15156. With our change-over valves and spare part kits as well as our worldwide stock and service network, we contribute to the high availability of your plant. Whether in the budget or final phase, LESER's technical sales engineers in your area and a special project processing area enable you to safely achieve the goals you have set.

Interview

Interview: How high quality lowers maintenance costs at BP’s Lingen refinery

Industry/Application:

Petrochemical refinery

LESER Solution:

Pilot-operated safety valves as well as API and Compact Performance

Customer since:

For more than 20 years

Quantity of Valves Supplied:

8 POSVs were checked in the normal maintenance cycle after five years

In 2014, LESER supplied the BP refinery in Lingen with spring-loaded safety valves in the API and Compact Performance product groups, as well as eight pilot-operated safety valves (POSV) up to size 8T10.

The system has been serviced by Etabo employees for many years. The pilot-operated safety valves now had to be serviced by Etabo. In an interview with Markus Heppner, the Etabo branch manager in Lingen, you can read what attracted attention at work and how he rates the maintenance of the safety valves.
 

Mr. Heppner, in which area are pilot-operated safety valves used?

Paraffin is produced in the plant area in which we serviced the valves.

Why did you decide to use POSV here?

The pilot-operated safety valves were selected for several reasons. The operating pressure of the system is very close to the set pressure of the safety valve. A POSV is ideal for this because this type of construction is tight until it is activated.

In addition, there is a high backpressure of up to 65% of the set pressure in the blow-off system if the valve should open. This value is above the admissible value for spring-loaded safety valves. Pilot-operated safety valves, on the other hand, operate up to 70% of the set pressure. On the other hand, the supply lines to the safety valves are very long. This can lead to an inlet pressure loss of more than three percent when the valves are activated.

LESER has solved the problem with a separate pressure tapping line. The piping is routed directly from the container to be protected to the pilot valve of the POSV. The supply lines for pressure tapping are now between 10 and 20 m long. At this point, it becomes clear that the planners have done their homework. The system was designed properly and yet efficiently.

What does maintenance really depend on?

The maintenance of a system must be carried out carefully by trained personnel in accordance with the manufacturer’s specifications, so that production can then run smoothly again. In addition, the maintenance time should be very short, because the maintenance of safety valves means costly plant downtimes.

Etabo was commissioned by the operator of the Lingen refinery, BP Europa SE, to service LESER’s pilot-operated safety valves as part of a normal maintenance cycle.

What did you notice during the maintenance of the pilot-operated safety valves?

We were very surprised about the good condition of the safety valves.

From the inside, they looked as if they had just been installed. With the exception of the main valve, all components in direct contact with the media were made of stainless steel and showed little tendency to corrosion. We know this from other valves of this type in a different way - but with the same service life.

Only the seals showed slight wear after four years of operation. We therefore only had to replace the FKM O-rings, as is also stated in the maintenance recommendation. The LESER spare parts kit contained everything we needed. In addition, LESER’s valves are very precisely manufactured, so we were quick to complete the maintenance.

What is your conclusion?
As a certified service partner of LESER, we know and appreciate the uncomplicated cooperation and high quality of the safety valves. As this maintenance shows, the components were in very good condition. The spare parts kits for the POSV enable very simple and cost-effective repairs.

The combination of all these factors makes our daily work easier and enables us to carry out maintenance accordingly quickly. And the shorter the maintenance time, the better for our customers, the plant operators. In this respect, LESER helps us to ensure a high level of customer satisfaction.

Download interview

Relevant downloads

In our comprehensive download area you will find all necessary documents and detailed information on safety valves you need.

Download

Contact LESER

Send a message to LESER

Contact

Contact finder

Your local contact person will support you with all questions concerning the safety valve.

Find your local contact

You may also like