LESER Clean Service Safety Valve Type 483
LESER Clean Service Safety Valve Type 483

Clean Service

Type 483

Safety valve with small to medium capacities, best cleanability and a variety of aseptic connections

Approvals

LESER Clean Service safety valves of Type 483 are designed, marked, produced and approved according to the requirements of the following regulations:

  • LESER CE Approvel
  • LESER ASME Approvel
  • LESER EAC Approvel
  • LESER Chinese TS Approvel

Technical specifications Type 483

Nominal Diameter at Inlet
DN 25 - DN 40 | 1" - 2"
Orifice
D - F
Actual Orifice Diameter d₀
13 - 25 mm | 0.512 - 0.984 in
Actual Orifice Area A₀
133 - 491 mm² | 0.206 - 0.761 in²
Pressure
0.1 - 16 bar | 1.5 - 232 psig
Temperature (in accordance with DIN EN)
-45 to 150 °C | -49 to 302 °F
Body Material
1.4435 (BN2) | SA 479 316L
Valve Connection
Clamps acc. to ASME BPE, DIN 32676, ISO 2852, Aseptic clamps acc. to DIN 11864 T1 Series A or B (with nut) or DIN 11851, Neumo Sterile thread (with nut), Welded end connection acc. to DIN 11850, Flange acc. to DIN 11864 T2 Series A or B, Aseptic flange Nut flange, Smooth flange, Varivent connection
Bellows Material (optional)
EPDM
Load Type
Spring loaded
Approvals
PED/ DIN EN ISO 4126-1, PED/ AD 2000-Merkblatt A2, ASME Sec. VIII Div. 1, CRN, AQSIQ, EAC
Specials
HyTight Assembly Designed and manufactured acc. to: DIN 11866, ASME BPE, EN 1672-2, DIN ISO 14159, USP class VI and FDA 21 CFR
Contact LESER Teaser

Contact LESER

Send a message to LESER

Contact
	LESER_Contact_worldwide_Teaser

Contact finder

Your local contact person will support you with all questions concerning the safety valve.

Find your local contact

You may also like